Vgate vLinker MC+ ELM327 Bluetooth 4.0/3.0 OBD2 ELM 327 FORScan Car Diagnostic For Android/IOS Scanner Tool
Purchase Notes:
1. Our products support popular software such as: BimmerCode/Torque/Forscan/JScan/Auto Doctor/OBD Fusion etc., We only sell adapters to be compatible with these software, but some of the functions of the software or the software itself are not free, you need to pay additional fees to the software company
2. If your mobile phone is IOS, when you use BT4.0 Ver., please connect to BT directly in the software, Don't connect to BT in phone settings.
3. If you are using MC BT version on Android, you need to press the switch first, and then search for BT: vlinker MC-Android
100% Original Vgate vLinker BT3.0/4.0:
1. Compatible with 99%+ world car models
2. Data buffer up to 2K bytes, UART baud rate increased to 230. 4 Kbpsc
3. Support Almost All ELM327/ELM329/OBDLINK Adapter Software
4. Automatic sleep and start to reduce power consumptione
5. OBD2 Standard Protocols+More protocols
6. Support user-defined commands
7. Request bytes up to 48 bytes
8. upport Firmware Update
9. Support user-defined APP
10. Support GMLAN and HS/MS-CAN (for Ford/GM)
11. 15 ELM protocols/23 STN protocols/64 User-defined protocol
Vgate vLinker MC+ BT3.0/4.0/WIFI Support Multiple Protocols:
15 ELM format protocols;
23 STN format protocols;
Up to 64 user-defined protocols.
OBDII 5 Standard Protocols:
SAE J1850 VPW
SAE J1850 PWM
ISO 9141-2
ISO 14230-4
ISO 15765-4 CAN
Additional Protocols:
SAE J1939 CAN
ISO 11898 (raw CAN)
for GMLAN Single Wire CAN
for Ford Medium Speed CAN (MS CAN)
These protocols cover almost 99% of the OBDII Cars on the market
Vgate vLinker MC+ BT3.0/4.0/WIFI Support Software ( APP ): Perfect compatibility: For Bimmer Code/For Torque/For Forscan/For JScan/For Auto Doctor/For OBD Fusion etc. 99% APP Software
Rich instruction set, compatible with more APP software:
Fully compatible with ELM's AT command set;
Fully compatible with STN's ST command set;
Expanded 7 AT commands for HS-CAN, MS-CAN, SW-CAN;
39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps.
Compatible with ELM and STN power management solutions.
Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep;
Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode.
Device sleep power consumption is less than 2 mA.
OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication.
UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
256-byte storage unit
More than 100,000 erasable times
Read and write operations on any unit in the storage area by using the VT command
Mix ID Sending" mode of CAN protocol.
Optional formatted send data according to protocol
Multiple WM sequence settings
Support AT command to manually set WM sequence
Support for specifying a protocol or a full protocol-wide temporary WM sequence
Support for a permanent link between a protocol and a private WM sequence
Secure bootloader for easy firmware updates
Typical Applications:
Vehicle telematics
Fleet management and tracking applications
Usage-based insurance (UBI)
OBD data loggers
Automotive diagnostic scan tools and code readers
Digital dashboards
Special Function of Vgate vLinker MC+ BT3.0/4.0 :
Fully automatic identification of vehicle protocols,quick reading of vehicle information
Fully automatic standby/start, no manual switch button required
How to Connect Vgate vLinker MC+ ? Vgate vLinker MC+ Bluetooth 4.0/3.0 :
1. Turn on theIgnition in the car
2. Plug in the adapterinto the OBD Port
3. Turn on Bluetooth (Bluetooth only needs to be turned on)
4. Open OBD Auto Doctor choose “Extras”,cick “Connectivity”, choose “Bluetooth”and “vLinker MC+” Drop out software and Enter again
Vgate vLinker MC+ BT3.0/BT4.0 Packing List :
1 x Vgate vLinker BT3.0/BT4.0
1 x User manual